Trusted spray foam roofing & insulation services for Kimberly, WI property owners. Licensed, insured, and backed by manufacturer warranties.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Kimberly.
Pre-purchase, post-storm, or routine maintenance — our inspection reports give you the data you need to make informed decisions about your roof. Infrared moisture scans reveal trapped water invisible from the surface.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
When restoration is not enough, our crews perform complete roof tear-off and replacement with modern spray foam roofing systems. Full deck inspection, substrate repair, SPF application, and protective coating — all warranted.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Energy costs hit smaller communities like Kimberly, WI just as hard as big cities — sometimes harder. Lapolla Industries specializes in spray polyurethane foam solutions that deliver R-6.5 per inch of insulation value, the highest of any roofing or insulation material available. For Kimberly property owners, that translates to immediate, measurable savings on heating and cooling.
Our spray foam systems create a seamless thermal envelope that eliminates air infiltration — the single biggest source of energy waste in buildings. Whether we are insulating your Kimberly attic, sealing your crawl space, or installing a new SPF roof, the science is the same: eliminate gaps, stop air movement, and let your HVAC system work the way it was designed to.
Here is what sets Lapolla Industries apart from other contractors in Kimberly.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Spray foam roofing eliminates tear-off waste, reduces energy consumption, and extends roof life by decades. Our systems help property owners reduce their environmental footprint while saving money.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Common questions about spray foam roofing and insulation in Kimberly, WI.
Yes. Every Kimberly crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Yes. Every project in Kimberly begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Spray foam insulation costs in Kimberly typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Kimberly homeowners see a full return on investment through energy savings within 3 to 5 years.
Most residential attic insulation projects in Kimberly are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Kimberly. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Kimberly roof with drainage challenges or heavy weather exposure.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Kimberly homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Lapolla Industries restored the roof on our distribution warehouse without any disruption to our operations. The crew worked in sections and we never had to shut down. The new reflective coating has already reduced our cooling load."
"Attic insulation upgrade from blown-in to spray foam. The crew masked everything off properly and the overspray was minimal. The temperature in our attic dropped dramatically and so did our energy bills. Worth the investment."
"Lapolla Industries coated our standing seam metal roof with a reflective system that stopped the leaks at the panel overlaps. The building stays significantly cooler in summer and the coating has held up perfectly through two winters."
Lapolla Industries proudly serves property owners in these cities near Kimberly.